Hits: 3
Packet Tracer Cisco Networking Assignment
This Quiz is OPEN BOOK. For this Part of the assessment you will create a network topology using the list of objects provided below. It is recommended that you complete each task in the order in which they appear.
You will need:
- 3 x 2950T switches
- 3 x PC (connecting to Switch 2)
- 3 x PC (connecting to Switch 3)
- Switch 2 & 3 (connecting to Switch 1) Packet Tracer Cisco Networking Assignment Help
IP addresses of the PC (for VLAN xx) will be assigned as per Appendix 2 below. You need to configure the IP addresses for Faculty/Staff, Students and Guest in the access and trunk interfaces to ensure communication.
IP addresses used in the topology and in the Addressing Table is for example.
Topology Diagram
Addressing Table
| Device (Hostname) | Interface | IP Address | Subnet Mask | Default Gateway |
| PC10 | NIC | 172.17.10.21 | 255.255.255.0 | 172.17.10.1 |
| PC20 | NIC | 172.17.20.22 | 255.255.255.0 | 172.17.20.1 |
| PC30 | NIC | 172.17.30.23 | 255.255.255.0 | 172.17.30.1 |
| PC40 | NIC | 172.17.10.24 | 255.255.255.0 | 172.17.10.1 |
| PC50 | NIC | 172.17.20.25 | 255.255.255.0 | 172.17.20.1 |
| PC60 | NIC | 172.17.30.26 | 255.255.255.0 | 172.17.30.1 |
Appendix 2 Packet Tracer Cisco Networking Assignment Help
| Last Name | First Name | VLAN | IP Address / 24 |
| – | Aakshita | 10 | 172.17.1.0 |
| – | Aakshita | 20 | 172.17.2.0 |
| – | Aakshita | 30 | 172.17.3.0 |
| Ganga | Arun | 10 | 172.17.4.0 |
| Ganga | Arun | 20 | 172.17.5.0 |
| Ganga | Arun | 30 | 172.17.6.0 |
| Singh | Sajan | 10 | 172.17.7.0 |
| Singh | Sajan | 20 | 172.17.8.0 |
| Singh | Sajan | 30 | 172.17.9.0 |
Initial Port Assignments (Switches 2 and 3)
| Ports | Assignment | Network |
| Fa0/1 – 0/5 | 802.1q Trunks | |
| fFa0/6 – 0/10 | VLAN 30 – Guest | 172.17.30.0 /24 |
| Fa0/11 – 0/17 | VLAN 10 – Faculty/Staff | 172.17.10.0 /24 |
| Fa0/18 – 0/24 | VLAN 20 – Students | 172.17.20.0 /24 |
Configure Base Topology
On each object (where applicable):
- Set a unique host name
- Set a unique display name
- All objects and host names must begin with your initials and the last 4 digits of your student ID. They must be unique to your assessment.
- Configure and assign ethernet interfaces on the PC.
- Create and name VLANS on the switches.
- Assign switch port(s) to a VLAN.
- Add, move, and change ports.
Deliverables:
- Build topology in packet tracer using your assigned IP address and ensure that you have unique host and display names. – 10 points.
- Verify VLAN configuration to show which ports have been added to the switches using show vlan brief command. Provide total of 3 screenshots (1 screenshot per switch). – 15 points.
- Provide screenshots showing the interfaces that have been configured as trunks on the switches (1 screenshot per switch). – 15 points. Packet Tracer Cisco Networking Assignment Help
- Ping PC10 to PC40 and provide the screenshot. – 15 points.
- Ping PC 30 to PC 60 and provide the screenshot. – 15 points.
- Save switch configuration and provide screenshots of the configuration for each switch. – 30 points.
Wrap Up and Submit
You will upload 1 file (word document with the screenshots below each deliverable), save them by using the required naming convention and upload those files to the assessment portal for the Quiz 2.
For Packet Tracer Cisco Networking Assignment Help please click here